This is probably an easy question. I have an older dial indicator for my MHM with a bullet shape tip. I would like to change that to the flat round tip offered by TMR, but I'm unsure how to recalibrate. Can someone offer some advice? Thanks
This is probably an easy question. I have an older dial indicator for my MHM with a bullet shape tip. I would like to change that to the flat round tip offered by TMR, but I'm unsure how to recalibrate. Can someone offer some advice? Thanks
Hi Richard - Once you change out for the flat tip you can put the plane onto the bed with the plane weight in place at station "0". From there just turn the dial that adjusts your cutting head up and down until the dial indicator tip is on the anvil and the dial reads zero. Hopefully this helps but please feel free to reach out if you have any other questions.
-Matt
To recalibrate after switching to the flat round tip, you'll first need to zero out the dial indicator with the new tip attached. Place the indicator on a known flat surface and adjust it until it reads zero. Then, test it on a known measurement to ensure accuracy. By the way, if you ever find yourself needing help with presentations, check out this service for when you need someone to do my powerpoint presentation at https://studyfy.com/service/do-my-powerpoint. It could save you some time.
